Ebro PEWA EBI - 6, Manual, Page: 15 / 35

EBI-6 English
15
3.2 Choosing a measuring point
Select a suitable location for the logger
and, if needed, suspend it using the
eyelet.
Never expose the logger to electri-
cal fields, e.g. from mains and high
voltage circuits. Always use the
logger according to the regulations
and protect it from direct inflow of
water.
4 Operation
4.1 Starting the logger
(recording of measurement
values)
Start the recording of measurement va-
lues with the software or with the Start/
Stop control.
For the latter, open the red protector cap
of the jack on the front side of the logger.
Plug in the Start/Stop control and press
the button on the topside.
In order to start the logger, you have to
keep the button depressed for a few
seconds, until the LED flashes rapidly
(5 times). Now the logger is started in
endless mode with the lastly set sample
rate.
Afterwards, unplug the Start/Stop con-
trol, and seal the jack again with the red
1 .......... Start/Stop-Control
..........Button