Chapter 1
13
B. Power Supply Configuration
Power up the device and hit the DEL key to enter the BIOS. When the BIOS screen
appears use the TAB key to select Advanced. Use the arrow keys to select Super IO
Configuration then type ENTER. The screen below will appear. Use the arrow keys to
select
Serial Port 6
RI/12V depending on what port the customer display is connected
to. Select 12V to enable power to the correct COM port. Type F10 to save the settings
and exit the BIOS setup.
Caution:
Never enable the 12 V without the customer display attached and be sure to
disable the 12 V before removing the customer display.
NOTE:
The figure above is for reference only; it is possible that the actual screen
on your device does not agree with it.
MSR
1. Remove the MSR cover from the device.
