ebm-papst S4E350-AP06-40 Operating Instructions Manual Download Page 7

Page: 7 / 10

Operating instructions

S4E350-AP06-40

Translation of the original operating instructions

4.3.3 Cable routing

No water may penetrate along the cable in the direction of the cable gland.

Fans installed lying flat

Make sure that the cable is routed in the form of a loop (water trap).

Ill. 2: Fan installed lying flat, cable routed as a water trap.

Fans installed in upright position

When routing the cable, ensure that the screwed cable glands are
arranged at the bottom. The cables must always be routed downwards.

Ill. 3: Cable routing for fans installed upright.

Item no. 12598-5-9970 · Revision 77954 · Release 2012-08-06 · Page 7 / 10

ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com

Summary of Contents for S4E350-AP06-40











Search results

Summary of Contents for S4E350-AP06-40

Reviews:

Related manuals for S4E350-AP06-40

Brands by name

Popular brands

ebm-papst S4E350-AP06-40, Operating Instructions Manual

Search results

Summary of Contents for S4E350-AP06-40

Reviews:

Related manuals for S4E350-AP06-40

Brands by name

Popular brands