28.08.2018
Page 79 of 95
The VPN network which you have just setup is now visible below the
“Anon”. By clicking on the VPN
network, the connection is tested first.
The successful connection to the VPN network is displayed with a tick mark. If the connection has not
been successful, no tick mark will be displayed. If the connections was not successful, go back to
your settings and check your username and password.
The VPN service can be individually enabled for every device.
8.6 DNS
If you enable this feature, you can use your eBlocker to distribute DNS requests to a list of different
DNS servers or have them resolved over the Tor network. There are three different options available
to you.
Default
Tor-Network
Custom list of external DNS servers
Internet Provider
The setting of your local network is used here. This means that the DNS server is used, which you
have stored in your router configuration.
Tor-Network
Here, the DNS requests are routed through the Tor network and passed to a DNS server at the Tor
network starting point. Make sure Tor is available. You can check this in the IP Anonymization > Tor
Network menu.
The DNS function should not currently be used if you operate your own DNS server in the local
network. Otherwise, problems may occur when resolving internal or external IP addresses.
Custom list of external DNS servers
Summary of Contents for PRO
Page 32: ...28 08 2018 Page 32 of 95...