KT-LCD8H eBike Display User Manual
Dear customer, please read this manual before you use KT-LCD8HDisplay. The manual will guide you use
the instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
Instruments using the structure form of instrument body portion and the operation buttons are
designed separately.
1
UP Button
10
Backlight and headlights
2
SW Button
11
℃
Environment temperature
3
DOWN Button
℉
Environment fahrenheit
4
MOTOR
W
Power display
12
Km/H
Riding speed(
metric)
5
ASSIST
Pas level
13
AVS
Average speed
6Km/H push power assist
MXS
MAX speed
6
THROTT
LE
Run sign
14
DST
Trip distance
7
Battery capacity indicator
ODO
Total distance
8
VO
L
Battery voltage
15
TIM
Single trip time
9
The brake display
TTM
Total trip time
1. Operation
1.
ON/OFF
Hold
button long to turn on the power, and hold
long for a second time to turn off
the power. When the motor stops driving and when the e-bike is not used for a consecutive
5 minutes, it will automatically shut down and turn off the motor power supply.
2.
Display 1
Hold
button to start up and enter display .
2.1 Turn on backlight and headlights
Hold
long to turn on backlight and headlights (the
controller should have headlight drive output function); hold
long again to turn off the backlight and headlights.
2.2 Assist ratio gear (ASSIST) switch
Hold
or
shortly to switch 1-5 file gear. Gear 1 is for
the minimum power, gear 5 is for the highest power. Each startup
will automatically restore the gear shutdown last time (the user can
set randomly). Gear 0 is without booster function.
2.3 6Km/H assist promotion function
Hold
and
flashes, the vehicle drives at the speed not
more than 6Km /h. Release
button, the function is invalid.
2.4 Display and delete of single data
After power on for 5 seconds, hold
and
at the
same time, single trip riding time (TM) and single trip distance
(DST) flash, hold
button shortly, the content of both is
cleared. If failed holding the button within 5 seconds, it will
automatically return the display interface after 5 seconds, original content is preserved.
3.
Display 2
Hold
button shortly in display 1 to enter display 2.
In the riding mode after 5 seconds, display 2 automatically
returns to display 1, and the original motor power (MOTOR W)
display is replaced with motor operating temperature display
(MOTOR ℃) display (the internal motor should be equipped
with the temperature sensor and the output of temperature detection signal).
4.
Display 3
Hold
button shortly in display 2 to enter display 3.
In the riding condition, five seconds later, a single maximum
speed (MXS) display automatically returns to the real riding
speed (Km/H).
5.
In display 3, hold
button shortly (SW),and the display will re-enter display 1.
6.
Hold
button to turn off the display and the power supply of controller.
