USE
When using the cooling function:
1. Unpack the unit and fix part a and part b together as shown in Fig.1
Rotate the exhaust hose clockwise to attach to the adapter.
2. Fix the adapter to the unit as shown in Fig.2, rotate the exhaust hose
clockwise to attach to the adapter.
3. Rotate the adapter clockwise until it stops, and then you can remove the
adapter from the cool air outlet.
When operating heating function:
1. Remove the outlet and the exhaust hose, then attach the two sub
assemblies
2. Fix the adapter to the cool air outlet.
3. Rotate the exhaust hose clockwise to attach to the adapter.
Note: For the best results in cooling/heating mode, please remove them
baffle plate
TROUBLE SHOOTING
Problem
Cause
Trouble shooting
E1
Electrical short on both
temperature sensors and the
PCB
Contact an electrician for
repair
E2
Electrical short of the
temperature sensor, the copper
tube or the PCB wiring
Contact an electrician for
repair
E4
Indicates that the water
tank is full or the plug may
be incorrectly wired
Drain the water. Check that
the plug has been wired
correctly.
38
