IMPORTANT INFORMATIONS
This unit can evaporate condensation and disperse it automatically through the
exhaust hose.
1. When the unit is in cooling mode, the drainage pipe does not need to be
attached. Please make sure that the rubber cap is firmly inserted in the
drainage hole, when the unit is running.
2. When operating in heating mode, the rubber cap “1” should be removed
from the drainage hole and a suitable drainage pipe attached in order to
improve heating performance.
3. When operating in dehumidifying mode the rubber cap “1” should be
removed from the drainage hole and a suitable drainage attached.
•
Please remove the air exhaust hose, connect a drainage pipe to the
drainage hole and
direct the water outside to improve dehumidifying performance.
•
When the water tank is full, E4 will be displayed on the display panel.
Please remove the rubber cap“2” from the drainage hole to drain out
the water. After the drainage has been fully drained, please restart
the unit, and will then can operate normally.
34
