ROT
EN
16
www.eberg.eu
3. Push the plugs into the holes.
4. Secure the screws with the O-rings
in the plugs through the holes in the
H-bracket.
5. Mount the panel on the bracket
and ensure that the panel is secured as
shown in below image.
2.3. FREE STANDING INSTALLATION (ONLY FOR ROT 600E AND ROT 720E):
1. Take out the two feet from the package.
2. Place the free standing feet on the ground, keep the slots of both feet inline. Make sure that the screw
is on the same side as the heater back side.
3. Screw the feet tight using a screw driver.
