LOOX
EN
10
www.eberg.eu
5. It is possible to set the desired fan angle in the range of 90 ° (Fig. 4).
WALL MOUNTING
1. Find and mark the place on the wall where the fan will be mounted. Do not mount or
hang the fan on the ceiling.
2. In the marked places on the wall, drill holes and place wall plugs in them. Pins and
screws are not included in the set. You should buy them yourself, remembering to
match the
diameter of the screws with the diameter of the holes in the fan housing.
Consequently, holes for wall plugs should be drilled with a diameter matching the
diameter of the wall plugs.
3. After placing the wall plugs in the holes drilled in the wall, screw the screws into the plugs.
4. The screws should not be screwed in completely. The screws should protrude 10 mm from
the wall surface.
5. 5. Align the holes in the fan housing with the screws protruding from the wall and thus
hang the fan on the wall.
6. Make sure that the fan is mounted securely and does not pose a threat to people in the
room.
Fig. 4
Fig. 5
6. To lift or move the fan, turn off the fan and lift it by the handle that is on the outer edge of
the fan (Fig. 5).
