FYN
EN
10
www.eberg.eu
•
Repairs to electrical devices may only be performed by qualified service technicians. Improper
repairs can result in significant risk to the user.
•
Install the device in a safe place to minimize the risk of accidentally tipping it over or tripping over
the power cord.
•
Do not cover the air inlet and outlet, do not use the device near curtains, drapes, blankets, etc. Ensure
free air circulation around the device.
•
Always keep the air inlet and outlet grilles clean and free of dust, hair and pet hair.
•
Keep all objects at least 1 meter away from the front and back of the device.
•
Never attempt to disassemble the casing of the device. Repairs that require opening the device or
access to internal parts should be performed by a qualified service. There are no user-serviceable
parts in the device.
•
Before moving the device, turn it off using the main switch and then disconnect it from the power
source.
•
Use this device only as described in the manual.
•
Do not connect the device to any external control devices.
•
The device should always be operated in an upright position and placed on a flat surface.
Warning! Do not cover! Do not cover the air flow of the intake or exhaust grilles in any way.
II. BEFORE THE OPERATION
•
After unpacking the device, check its condition. Do not use the device in poor technical condition.
You must report any damage found.
•
Keep packaging materials such as foils and staples out of the reach of children. Dispose of
the packaging components in accordance with local regulations and taking into account the
environmental impact.
•
For your convenience, record the date of purchase on the “Warranty” page of this manual and attach
your proof of purchase. Retain this information in case warranty service is required.
•
It is recommended to leave the box for storage out of season.
•
Choose a suitable location for the device.
•
Follow local safety regulations.
•
Straighten the power cord before starting. Working with a coiled cord may cause overheating and
a risk of fire.
•
The use of an extension cord with this device is not recommended.
•
Do not connect the device to the mains until it is fully assembled (base) and stable.
•
Connect the plug to an appropriate wall socket with the parameters corresponding to the data on
the rating plate of the device.
