ELIO
EN
50
www.eberg.eu
The SLEEP function maintains the room at optimum temperature without excessive fluctuations in either
temperature or humidity with silent operation. Fan speed is always at Low, while room temperature and
humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1°C (1°F) per hour in a 2 hour period. This
new temperature will be maintained for the next 6 hours. Then the appliance turn it off.
The SLEEP function can be canceled at any time during operation by pressing the “Sleep”, “Mode” or “fan
speed” button.
In DRY mode, SLEEP function is still available.
Switch the unit of temperature
When the appliance is running, press the
button, then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig1.
After change, in cool mode, the screen display like fig2.
SETTING THE TIMER
This timer can be used to delay the appliance start-up or shutdown, this avoids wasting
electricity by optimizing operating periods.
a) Programming start up
Turn on the appliance, choose the mode you want, for example cool, 24°C, high fan speed. And turn off
the appliance by the remote control.
•
Press the
button twice, the screen will display hours, the
symbol and
symbol are
flashing .
•
Press the
or
button until the corresponding time is displayed.
•
Press the
button again, the timer will be active, the
symbol and
are displayed
on screen.
•
Press the
button again or the
button, the timer will be canceled, and the
symbol
will disappear from screen.