AIRO 85
EN
11
www.eberg.eu
•
Before starting the assembly, please check that the device is complete and has no signs of
damage.
•
Before starting the device, place it vertically on a flat and stable surface.
•
Make sure the inlet and outlet of the device are not blocked.
•
When placing the fan on a platform, always make sure that the power cord does not hang
where it can be accidentally pulled and the fan may fall.
•
Do not hang or mount the fan on the wall or ceiling.
•
The device must not be used incomplete or unassembled.
•
Make sure that there are no loose parts or packaging components near the machine while
operation.
1. Prepare the two parts
of the base together and
power cord like on the
picture 1.
2. Pass the power cord
through the center hole
of the base, and snap
the two pieces together.
3. Line up the tower fan
on the base. Switch the
know and tighten it.
Mode indicator
Oscillation
function indicator
Temperature
indicator
Fan speed indicator
(low / mid /high)
3. BEFORE THE FIRST START
4. ASSEMBLY
