17
In conclusion, select the type of alarm:
Press the
ALARM
button for the selec-
ted alarm time until the display indicates
...
-
ALM
: This means that an alarm tone
(beep) will sound for approx. 10
minutes.
-
RAD
: This means that the radio will
be switched on at the alarm time for
about 60 minutes.
- Both codes disappear: This means
that the alarm function is deactivated.
If you would like to be woken by the radio,
you should select the desired station and
volume level before going to sleep.
You can then simply switch off the device.
h) When the Alarm Goes Off
When the alarm tone or the activation of
the radio function is triggered at the alarm
time, you can ...
reset the alarm by 9 minutes (snooze
function) by pressing the
SNOOZE
button,
or press the respective
ALARM
button
to reset the alarm to the next day.
If you would like to
completely
deactivate
the alarm function, this can only be done
as follows.
Note:
The configured alarm and clock
times are lost if the device is without power
for longer than 30 seconds, for instance
while changing the batteries. Be sure to
check all configured times afterward!
KH2025-2026_IB_UK 01.04.2004 11:29 Uhr Seite 17
