4
Ebeco AB provides a 10 year guarantee for defective ma-
terials in Snowmelt, Snowmat, MI-60 and Multiflex 27.
The guarantee only becomes valid under condition that
the installation is carried out by a qualified electrician
according to the applicable regulations and in accord-
ance with installation instructions issued by Ebeco. This
guarantee certificate, including the test record below,
must be completed in its entirety and, along with the
materials specification or invoice, must be signed by
the electrician who carried out the installation. Further-
more, there must be photographs/sketches that show
the mat in its entirety after laying but before covering.
If defects should arise during the guarantee period,
Ebeco AB undertakes to repair or alternatively replace
Snowmelt/Snowmat/Multiflex at no cost to the pur-
chaser.
Ebeco AB also undertakes to restore the surface coating
to its original condition after the repair or replacement
has been completed. In order to be able to remedy the
fault, the purchaser must have saved or have access to
1 m² of the existing surface material. For any controls
(timer/panelboard), where defects occur after 3 years,
Ebeco AB will supply a new control.
The guarantee does not apply to installations that
have been carried out by an unqualified electrician or
alternatively if an unqualified electrician has carried out
modifications or repairs. Nor does the guarantee apply
if the defect has arisen as a result of using incorrect
materials and construction or as a result of incorrect
installation. Nor is damage covered that is a result of
vandalism, fire, lightning, water damage or damage
caused by negligence, abnormal usage or as a result
of an accident.
In the event of a material defect that is covered by the
guarantee Ebeco AB must be notified.
In the event of the guarantee being invoked, this
guarantee certificate with accompanying invoice of
installation, material specification plus completed and
signed test record must be presented.
EBECO AB
Martin Larsson, CEO
Electrical installation carried out by:
_____________________________________________
according to enclosed materials specification.
Date:_________________________________________
Signature: _____________________________________
Test record Snowmelt, Snowmat MI-60 and Multiflex 27
Min. insulation value 10 Mohm.
Before laying
After fixing
After surface coating / embedding
Mat / Cable no. 1-6
Resistance
value
Insulation
value
Resistance
value
Insulation
value
Resistance
value
Insulation
value
No. 1, E-no.:
No. 2, E-no.:
No. 3, E-no.:
No. 4, E-no.:
No. 5, E-no.:
No. 6, E-no.:
*Applies only under condition that the product is installed together
with Snowmat timer, E 18 970 77, or Ebeco’s panelboard.
Guarantee certificate
Snowmelt, Snowmat, MI-60 and Multiflex 27*
