EBARA EV-PA 250, Instruction Manual

Page: 28 / 51

P .
28
PM10U
EBARA
CORPORATION
Wire the connector for the main power supply (100-230V
±
10
％
AC at 1-phase 50Hz/60Hz).
Use the power cable recommended in Table 3.2.
Transient overvoltage on power supply: Instrallation category 2 of IEC 60364-4-443
Table 3.1 Receptacle Specifications
Pump model EV-PA250 EV-PA500
Receptacle type CM-11
Recep. Manufactuer HIRAKAWA HEWTECH Corp.
Plug type (100V class) VM0291
Plug type (200V class) VM0303B
Power capacity VA 450 660
Table 3.2 Recommended Power Cable
Area Voltage Type Manufacture Specification
Suitable
wire
Japan
US
100~125V
NR VM602-VM0291 3M
NON PB
HIRAKAWA
HEWTECH
Corp.
13A 125VAC 3m
AWG#16
Japan
US
EU 200~230V
NR VM0301 3M
NON PB
10A 250VAC 3m
Power outlet terminal:
No plug
AWG#18
3m
Power outlet Pump side
Plug(male) Plug(female)
Fig.3.1 Sketch of Power cable
（
NR VM602-VM0291 3M NON PB
）
If you have any requirement about the power cable, please contact EBARA or your dealer.
WARNING
Granding at power outlet. Should be check by qualified electricians
!