Page 4 of 15
Drawing : - TPC361
Issue
: - 3
Date
: - 03/10/12
COVERS
The CD85 covers can be swapped to allow the airflow direction to be changed
to better suit the application the unit is to be used for. To change the covers,
first remove the 4 off retaining screws and washers from each cover, swap
cover positions and replace 4 off retaining screws and washers. If changing
the evaporator covers then the filter retaining mesh should always be placed
behind the Evaporator Grille Cover. This is held in place with 4off M3 hex
head bolts.
Evaporator Grille Cover and Evaporator Blanking Cover are interchangeable.
Condenser Grille Cover and Condenser Blanking Cover are interchangeable.
Evaporator and Condenser covers are not interchangeable.
The different combinations available are shown below.
Evaporator Grille
Cover
(Air into machine)
Condenser Grille
Cover
(Air out of machine)
Evaporator Blank
Cover
(Blocks airflow)
Condenser Blank
Cover
(Blocks airflow)
Evaporator Grille
Cover
(Air into machine)
Condenser Blank
Cover
(Blocks airflow)
Evaporator Blank
Cover
(Blocks airflow)
Condenser Grille
Cover
(Air out of machine)
E B A C C D - 8 5 I N D U S T R I A L D E H U M I D I F I E R
Pure n Natural Systems | purennatural.com | 1-800-237-9199
