UXA Series Owners Manual
Amplifier Output Connections
Note : The UXA4406, UXA4410 and UXA4810 series amplifiers can produce high voltages at their outputs.
Always use genuine Neutrik NL4 connectors. Un-bridged outputs must use Class 2 or class 3 wiring. Bridged
channel pairs must use Class 3 wiring. Custom wiring must only be performed by qualified personnel.
The UXA4406 and UXA4410 amplifier is fitted with one NL4 connector per amplifier channel.. The appropriate
conductor terminations are shown below and on the rear panel of the unit.
14
Using unbalanced connections
Please note that the use of unbalanced connections is not recommended, however when connecting the
amplifier to an unbalanced audio source, the signal conductor should be connected to XLR pin2. The ‘Cold’
conductor or cable screen should be connected to XLR pin 1 with a short connection made between pin 1
and pin 3.
Summary of Contents for UXA4406 series
Page 1: ......
