UX48 Owners Manual
13
Using unbalanced connections
Please note that the use of unbalanced connections is not recommended, however, when connecting the device
to an unbalanced audio source, the signal conductor should be connected to XLR pin2. The ‘Cold’ conductor or
cable screen should be connected to XLR pin 3 with a short connection made between pin 1 and pin 3.
An unbalanced input may be driven by connecting pin-3 ‘cold’ signal to the ground connection of the
unbalanced destination input. The cable shield is connected to pin 1 at the source (this device), and to ground
at the destination device (along with the pin 3 ‘cold’ connection). Alternatively, if the cable is a single core plus
shield, the cable shield should be terminated to both pins 1 and 3.
2
1
3
HOT +
Shield
Input XLR unbalanced connection
HOT +
Shield
Output XLR unbalanced connection
2
1
3
Pin 2 HOT +
Pin 3 COLD -
Pin 1 Shield
Output XLR balanced connection
2
1
3
Summary of Contents for UX48 series
Page 1: ......