EAW UX48 series Owner'S Manual Download Page 11

UX48 Owners Manual

11

EAW UX48 Introduction and Key Features

Introduction

The EAW UX48 Advanced System Processor represents current state-of-the-art technology. Taking advantage of 
the latest advances in Analog to digital conversion and digital signal processing technologies the unit achieves 
performance levels among the very best that engineering permits. Below is a list of key features, followed by 
some information on the major advancements of the UX48 feature set.

Key Features

  –  EAW minimal signal path design
  –  48kHz sampling frequency 
  –  Three rotary encoders, illuminated buttons and graphical display provide a rapid, intuitive and user-friendly  
    control interface
  –  High speed capable and flexible Ethernet communications that supports DHCP, static-IP and auto-IP and  
    direct connection to a computer
  –  Class leading sonic performance achieved by the use of state of the art converters, a 4th Generation  
    Analog Devices Sharc DSP and highly advanced DSP algorithms
  –  Linear phase HF system EQ profiling which provides perfect integration between enclosures
  –  Dante audio networking with automatic fall over to Analog or AES3
  –  AES3 inputs and outputs, switchable in pairs
  –  High performance ‘universal mains’ switch mode power supply

 

Greyboxes include:

EAW Focusing

By deploying advanced signal processing EAW Focusing corrects for mechanically 

induced anomalies in the loudspeakers acoustic system and provides a pure 

impulse response.  This means the sound you hear is true to the original version free 

from time smear created by intra-cabinet reflections.

Crossover Settings

What is a Greybox?

A Greybox is a file that includes everything you need to get optimal performance from an EAW loudspeaker.
‘White’ component that is user accessible. ‘Black’ component that is EAW-provided and locked down.  
Mix together = Grey.

DynO (where applicable) & limiters

Dynamic Optimization, which maximizes the output of every passband. This tangibly 

increases output over what would otherwise be possible.

Summary of Contents for UX48 series
























Reviews: