SPECIFICATIONS SM84
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
SM84/2 pp
October 2001
Printed in USA
The two-way full range loudspeaker system shall incorporate a
four 8-in LF transducers and a 3-in voice coil/1.4-in exit
neodymium compression driver. Powering mode is bi-ampli-
fied.
The LF drivers shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded on a constant directivity horn with a nominal coverage
pattern of 40° (h) x 90° (v).
System frequency response shall vary no more than ±3 dB from
60 Hz to 17 kHz measured on axis. The LF shall produce a
Sound Pressure Level (SPL) of 99 dB SPL on axis at 1 meter
with a power input of 1 Watt, and the HF shall be capable of
producing an output of 110 SPL on axis at 1 meter. The LF
shall handle 1000 Watts of amplifier power (continuous) and
have a nominal impedance of 4 Ohms. The HF shall handle 200
Watts of amplifier power and have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be irregularly triangular in
shape with its baffle angled up 53°. It shall be constructed of
multi-ply, void-free cross-grain-laminated Baltic birch ply-
wood and shall employ extensive internal bracing. It shall be
finished in wear-resistant textured black paint. Input connec-
tors shall be 4x Neutrik NL4 Speakon (2 per side). The front of
the loudspeaker shall be covered with a powder coated perfo-
rated steel grille backed with open cell foam to protect
against dust.
The two-way full range loudspeaker shall be the EAW model
SM84.
FRONT
GRILLE PARTIALLY SHOWN
29.75
BACK
12.50
SIDES
.73
4.00
3.00
2X INPUT
R 13.00
8.61
.59
.59
15.90
6.96
4.00
TOP
509067(A)
8/31/00
Manufacturing tolerances are +/- 0.13 and +/- 1°
