SPECIFICATIONS SM129z
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
SM129z-0001331/2 pp
April 2002
Printed in USA
Manufacturing tolerances are +/- 0.13 and +/- 1°
5.25
(7.06)
2X 7.06
L
C
TOP
15.00
GRILLE PARTIALLY SHOWN
DIMENSIONS APPLY TO
BOTH SIDES
2X 37°
4.31
RIGHT SIDE
C
L
SEE NOTE 2
FRONT
VIEW B-B
L
C
LEFT SIDE
B
SM129z
4X RUBBER FEET
1.25
8.87
3.59
B
4.62
11.75
13.51
NOTES:
1. SYMBOL INDICATES MOUNTING POINT
5/16-18 T-NUT FOR ULTIMATE BRAND STAND.
2. FEET ADD APPROXIMATELY .4 TO HEIGHT OF
CABINET.
14.62
9.50
4.00
3.00
6.44
23.58
2X HANDLE
2X INPUT
23.58
22.50
WHITINSVILLE, MA USA
S/N
SM129z
PIN 1--...--
PIN 1+...+
PIN 2--...NC
PIN 2+...NC
The 2-way full-range loudspeaker shall incorporate a 12-in LF
woofer and a 1-in exit HF compression driver.
The LF woofer shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF compression driv-
er shall be loaded on a constant directivity horn with a nom-
inal beamwidth of 90° (h) x 45° (v). An internal passive fil-
ter network shall provide fourth order acoustical crossover and
system equalization.
System frequency response shall vary no more than ±3 dB from
80 Hz to 19 kHz measured on axis. The loudspeaker shall pro-
duce a sound pressure level (SPL) of 97 dB SPL on axis at 1
meter with a power input of 1 watt, and shall be capable of
producing a peak output of 129 dB SPL on axis at 1 meter. The
loudspeaker shall handle 450 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 8 ohms.
The loudspeaker enclosure shall have rubber footpads on one
side. Its baffle shall be angled up 37°. It shall be construct-
ed of exterior grade Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear resist-
ant textured black paint. Input connectors shall be four
Neutrik NL4 Speakon (two per side). Two 5/16"-18 threaded
mounting points shall be provided on top of the enclosure
spaced to accept a third party external stand mount adaptor.
The front of the loudspeaker shall be covered with a powder
coated perforated steel grille backed with open cell foam to
protect against dust.
The 2-way full-range loudspeaker shall be the EAW model
SM129z.
INPUT PANEL
