1. On each side of the loudspeaker, release the four panel screws that attach the enclosure to the
rigging assembly.
2. Slide the enclosure out from between its two rigging assemblies to the front of the array.
Page
20
THE ENCLOSURE IS HELD IN THE ARRAY BY 8 SPRING LOADED SCREWS.
4 FROM THE LEFT PANEL AND 4 FROM THE RIGHT PANEL.
THESE SCREWS REMAIN IN THE THE SIDE PANELS AFTER DISASSEMBLY.
FULLY DISENGAGE THE PANEL’S
4X MOUNTING SCREWS
FROM THE ENCLOSURE
LEFT PANEL
ASSEMBLY
ENCLOSURE
(MOUNTING
POINTS
INDICATED
BY ARROWS)
DANGER: WHEN THE ENCLOSURE TO BE REMOVED
FROM THE ARRAY IS FACING DOWNWARD
IT WILL FALL FREE WHEN THE 8 MOUNTING
SCREWS ARE DISENGAGED. TO PREVENT THIS,
HOLD THE ENCLOSURE’S FRONT INTO THE ARRAY
WHEN DISENGAGING THE 8 MOUNTING SCREWS.
Figure 2 Remove and Replace Enclosure From the NTL720 Hanging Array
Figure 3 Remove and Replace Enclosure From the NTL720 Hanging Array
ENCLOSURE IS REMOVED
FROM THE ARRAY
THRU THE FRONT
OF THE RIGGING
Summary of Contents for N T L 7 2 0
Page 1: ...N T L 7 2 0 L O U D S P E A K E R O W N E R S M A N U A L...
Page 2: ...ii...
Page 34: ...Page 28...
Page 35: ...Page 29...
