KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01
KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01 Page 29 of 29
1. Remove the front and rear connecting pins from the hinges between the top enclosure and the Fly-Bar
so the hinges drop into the enclosure s Hinge Tubes.
2. Reinsert the removed connecting pins into the holes on the Fly-Bar from which they were removed.
3. Fly out the Fly-Bar.
4. Push the pallet loaded with the four KF760s out of the way.
5. Lower the Fly-Bar to the deck and disconnect the chain motors from the Fly-Bar.
6. The Fly-bar can be left as is or dismantled for packing. To dismantle, remove the Tail Bar (if used)
from the Spreader and remove the Spreader from the Rigging Bars.
All manuals and user guides at all-guides.com
