CE DECLARATION OF CONFORMITY
PRODUCT
Product
Models: SB730
p/n
0006108
Description:
Loudspeaker
Dimensions (h x w x d): 482 mm x 724 mm x 724 mm / 19.0 in x 28.5 in x 28.5 in
Material :
19 ply-per inch Baltic birch plywood
Integral
aluminum
rigging
fittings
Supplied Accessories: 4x Connecting Pin
p/n 0006122
OR
Button
Head
Connecting
Pin
p/n
0020558
Accessories:
KF730/SB730
Fly-Bar
p/n
0006265
Spare
Connecting
Pin
p/n
0006122
SB730 Caster Pallet
p/n 0006386
COUNTRY OF ORIGIN FOR THE PRODUCT AND COMPONENTS
United States of America
TECHNICAL SPECIFICATIONS
The SB730 loudspeaker is to be suspended below or stacked on top of the KF730 Fly-Bar.
When used in accordance with the KF730 / SB730 Owner’s Manual the Working Load Limits (WLL) and
Design Factor are:
Nominal Weight
50.3 kg / 111 lb
WLL (rigging points at corners)
680.4 kg / 1500 lb
Design Factor
10:1
STANDARDS CONFORMITY
The SB730 loudspeakers are designed and intended to be suspended only from the KF730 Fly-Bar in
accordance with the KF730 / SB730 Loudspeaker Owner’s Manual.
Up to twelve (12) SB730 loudspeakers may be vertically suspended in a column below the KF730 Fly-Bar.
The maximum recommend
ed
quantity of stacked SB730s is four (4)
Combinations of KF730s and SB730s may be flown in the same array. Because KF730s and SB730s have
different weights, the total weight of any combination must not exceed the WLL of the integral rigging
components or that of the KF730 Fly-Bar. For combinations of KF730 and SB730, use these formulas to
determine maximum quantities of each. In all cases, round the answer DOWN to the nearest integer. This
keeps the total weight of the KF730/SB730 combination within the above-specified WLL.
Maximum total quantities for suspended configurations using a combination of KF730 and SB730
loudspeakers are:
Product
Maximum Total Combination
KF730
Maximum quantity KF730 = 18 - (quantity SB730 x 1.5)
SB730
Max quantity SB730 = 12 - (quantity KF730/1.5)
The maximum recommended quantity for a stacked combination of KF730/SB730 is six (6) KF730 over four
(4) SB730.
The ultimate strength for the SB730 integral rigging points was determined utilizing calibrated and certified
destructive pull-tests.
Page 3 of 7 November 2006
Eastern Acoustic Works
Tel: 800 992 5013
One Main Street
e-mail:
Whitinsville, Ma 01588
www.eaw.com
