manualshive.com logo in svg

EAW DX8, Instruction Manual, Page: 23 / 36

Share
Download
EAW DX8 Instruction Manual Download Page 23

DX8 – 

23

BUTTONS

Views

These four buttons open the Graphic EQ,
Parametric EQ, Output Compressor, and Automix
views, overlaid across the input section.

Graphic EQ

Click this button to open the 31-Band Graphic
Equalizer window for the A and B outputs. Click and
drag on a slider knob to adjust the EQ. The selected
band’s 

GAIN

 and 

BAND

 (frequency) are displayed

at the top of the window. Click the 

ON

 button to

turn each Graphic EQ on and off. The Graphic EQ
can also be turned on and off with the buttons on
the output strip. Click the 

RESET

 button to return all

the sliders to 0 dB (center).

The 

A to B

 button (and corresponding 

B to A

button on the B side) copy the settings of the A
Graphic EQ to the B Graphic EQ (and vice versa).
Use the Graphic EQ to make adjustments for the
response of the room and smooth the frequency
response.

Parametric EQ

Click this button to open the 5-Band Parametric
Equalizer window for the A and B outputs. Each
band has three knobs: Gain (

±

15 dB), Center

Frequency (20Hz-20kHz), and Bandwidth (0.1 to 6
octaves). Click and drag on the individual knobs to
adjust each parameter. A graphical display on the
left-hand side of the window indicates the current
response of the EQ.

If two bands are set to the same frequency, the

gain settings are additive and the response curve
may go off the display. The response is not limited
to the display scale, and the 32-bit floating-point
processors accurately calculate the combined
response of all five bands.

The bandwidth is calculated as the 1/2 gain

bandwidth in octaves. For example, if the center
frequency is 1kHz with a gain of 10 dB and 2 octave
bandwidth, the response is down to 5 dB (1/2 gain)
at 500Hz and 2kHz (a span of two octaves).

Click the 

ON

 button to turn each Parametric EQ

on and off. The Parametric EQ can also be turned
on and off with the buttons on the output strip.
Click the 

RESET

 button to return all the knobs to

their default settings (flat response).

The 

A to B

 button (and corresponding 

B to A

button on the B side) copy the settings of the A
Parametric EQ to the B Parametric EQ (and vice
versa). Use the Parametric EQ to help eliminate
specific troublesome peaks and dips in the room
response.

Summary of Contents for DX8





































Reviews:

No comments