0. About this documentation
0.2 Target group
0.2 Target group
This Manual is intended for electricians and electrical engineers, as well as for the
people who will be in charge of performing the electrical installation and people who
will be using the XV300 as an operating and monitoring device or as an integrated oper-
ating and control device in their own applications.
The information in this document is required in order to be able to use the XV300 safely
and effectively.
This manual describes all the lifecycle stages for the XV300: transportation, installation,
commissioning, operation, maintenance, storage, and disposal.
It does not, however, go over its operating system or application software.
CAUTION
Installation, electrotechnical expertise
Follow the safety instructions for the XV300!
The section on safety instructions must be read and understood by every-
one who will be working with the HMI panel before the actual work is per-
formed.
WARNING
Incomplete operator manual copies
Working with individual pages taken out from the operator manual may
lead to bodily injury and property damage due to missing safety inform-
ation.
Always work with the full document.
0.3 Legal Disclaimer
All the information in this manual has been prepared to the best of our knowledge and in
accordance with the state of the art. However, this does not exclude the possibility of
there being errors or inaccuracies. We assume no liability for the correctness and com-
pleteness of this information. In particular, this information does not guarantee any par-
ticular properties.
Do not use the XV300 before reading and understanding this manual.
It is assumed that the user of this manual is thoroughly familiar with the information
found in the manuals for incorporating the XV300 into automation processes.
Hazards posed by the XV300 cannot be eliminated if the safety instructions are not
observed – especially if the XV300 is commissioned and maintained by unqualified per-
XV300
12/15 MN048017 EN www.eaton.eu
9
