Eaton XV200, Operating Instruction

Page: 5 / 60

1 General
1.1 Purpose of these Operating Instructions
MICRO PANEL XV200
10/2011 MN04802007Z-EN www.eaton.com
5
1 General
1.1 Purpose of these Operating Instructions
These Operating Instructions contain the information required for the correct and safe use of the
MICRO PANELs XV200; MK2. The Operating Instructions are part of the devices and must therefore
be kept nearby.
These Operating Instructions describe all aspects of the devices: transport, installation, commissioning,
operation, maintenance, storage and disposal. The operating system and the application software are
not described.
1.2 Comments about this document
Please send any comments, recommendations or suggestions relating to this document to info-auto-
mation@eaton.com.
1.3 Additional documentation
The following documents may be helpful in the use of the device in addition to this document. These
can be downloaded from our home page (www.eaton-automation.com/en), «DOWNLOADS» section.
[1] MN04802014Z-EN Quick Start Guideline XV200
(commissioning the MICRO PANEL, establishing communication with the programming PC and
creating projects with GALILEO and MXpro)
[2] MN05010007Z-EN System Description Windows CE
(operation of the Windows CE operating system on MICRO PANELs)
[3] MN05010009Z-EN System Description Networks in Brief
(information on networks in general and on the integration of PCs and MICRO PANELs in
networks)

Read Chapter 3 Safety regulations,  11 before working with the device. This contains
important information for your personal safety. This chapter must be read and under-
stood by all persons working with this device.
WARNING
Incomplete copy of the Operating Instructions
Working with individual pages of these Operating Instructions may cause damage
to property or personnel by failure to observe safety-related information.

Always work with the complete document.