28
Eaton xStorage 400 Installation and Operation Manual P-164001032—Rev 01
44..55
EExxtteerrnnaall A
AC
C P
Poow
weerr W
Wiirriinngg IInnssttaallllaattiioonn
This product has been evaluated for use with
copper wire
only
. Reinforced insulation to the mains is required.
To install wiring:
1.
If not already open, open the front doors by lifting the latch from the bottom and turning to the right
(counterclockwise) and swing the doors open.
2.
If not already removed, remove the xStorage dead front panel by removing the screws from the panel.
Carefully, remove the panel from the system. Retain the hardware for later use.
See
for panel location.
Figure 16. xStorage Dead Front Location
Note: xStorage 400 shown without doors to show detail.
Power Terminal
Dead Front Panel
Summary of Contents for xStorage 400
