Eaton XP-504-10-A10-A01-2B, Manual

Page: 67 / 134

4. Using peripheral devices - External connections
4. Using peripheral devices - External connections
With its ports, Eaton's XP-504 series makes it possible to connect a variety of peri-
pheral devices and components.
The features on the individual devices in the XP-504 series are based on the devices'
needs. Not all connectors are available on all the devices in the series.
DANGER
STRAY CURRENTS
Large equalizing currents between the functional earthing system
and the ground system of different devices may result in fire or in mal-
functions due to signal interference.
If necessary, route an equipotential bonding conductor, with a
cross-sectional area that is several times larger than that of the
cable shielding, parallel to the cable.
CAUTION
INTERFERENCES
The values specified in the technical data, as well as the device's
electromagnetic compatibility (EMC), cannot be guaranteed if the fol-
lowing are used: unsuitable cables, improperly assembled and ter-
minated cables, and/or wiring that does not conform to the applicable
standards.
Only use cables assembled and terminated by professionals.
The cables being used must be assembled and terminated as
required by the port/interface description in this document.
When wiring the XP-504, follow all instructions regarding how to wire
the corresponding port/interface.
All general Directives and standards must be complied with.
XP-504 04/2022 MN048028EN Eaton.com
67