6. Web Config Tool
6.3 System configuration of the device
6.3.5
Date & Time menu
System configuration/
Fig. 22: Date & Time
6.3.5.1 Date & Time
The time currently set up for the device is shown under Date & Time.
You can change the date and time (including the seconds) here.
The device will always save the UTC time (formerly known as Greenwich Mean Time)
as its system time. The relevant time zone adjustment, if any, will then be made
before displaying the time.
If you use NTP time synchronization, it is important to set the right time zone, since
the time received will be the UTC time.
6.3.5.2 Time synchronization with NTP
In the Time synchronization with NTP pane, you can enable NTP and select a pre-
ferred address and a backup address. The NTP service will then be used to correct
the time and the system time on a regular basis.
XH-303
09/22 MN048029EN Eaton.com
58
