Power
5VDC,
2A
USB
B
USB
A
micro
SD
LAN
LED1
LED2
LAN
SD
USB-A
USB-B
Power
Connectors:
5
Functions:
Symbol
LED
Function
Power
Green: Power ON, USE
Orange: Booting
Network
Red: No Internet
connection
Orange: Internet connection
Green: Remote Server Connection
RF Traffic
Green: RF traffic
System Message
Yellow: Message in the Mailbox
Battery
Green: All batteries OK
status
Yellow : At least one battery is weak
(assigned sensors) Red: One is very weak or empty
Symbol
Button
Function
Recovery
No RF programming functionality!
1. Restore default admin password and network settings to
DHCP: Press button for 15 seconds (power LED flashes
green and will finally change to orange), system will reboot.
2. Complete Recovery, software & default settings being
copied from SD card. Please backup your settings as they
will be lost during recovery process. Disconnect the power
supply, insert the EATON microSD card, during
reconnecting the power supply - keep the button pressed
for ~ 3 sec till the power LED switches from orange to red.
The flashing red power LED indicates the update process.
Make sure the power supply is not disconnected and the
sd card is not removed. System will reboot when finished.
In case of a failed recovery process, all LEDs will flash red
and please contact your Eaton support contact person.
MRF
Icon
Function
Double Click on
Ident Smart Home Controller
Icon in MRF
Green Blinking 30s (Ident)
>MRF2.19
Connectors
Functionality
LAN
Ethernet
Communication
micro SD
System Rescue
Boot Recovery
USB A
reserved
USB B
reserved
Power
Power supply
LAN LED
OFF
ON
Blink
LED1
valid Link Data activity
LED2 100Mbit 10Mbit
