Eaton XC-CPU101 Series, Instruction Leaflet

Page: 66 / 96

Creating a sample project
12/14 MN05003004Z-EN
48
A double click on the target system leads to the following (see
figures). The register tabs “Target platform”, Memory layout” and
“General” just present information about the target system. No
settings can be made in these tabbed screens.
X
If a CANopen slave is to be integrated into the configuration,
click the “Networkfunctionality” tab and tick the “Support
network variables” check box.
You will get a message that this target system supports the CAN
network.
The “Support network variables” control box must only be
activated if you wish to work with network variables. When
activated, the libraries required for operation of network variables
are added automatically. This function is not required if you use a
CAN Master/CAN Device.
Figure 62: Select target system
Figure 63: Target system settings – target platform