3
S e r v i c e P u l l o u t
I n s t a l l a t i o n
91712
GLASS INSTALLATION
1. Carefully unpack the Glass Panel (located under the
drawer) and position it on the flange at the bottom of
the opening in the Drawer front. See figure 5.
Drawer front
Glass Panel
Flange
Figure 5
Figure 6
Service Pullout
2. Hold the Glass Panel in place and install the two
Glass Retainers onto the threaded studs located on
both sides of the Drawer front. See figure 6. Slide
the retainers against the Glass Panel and secure them
using the four 1/4”-20 Kep nuts provided.
1/4”-20 Kep nuts
Glass Panel
Glass Retainers
Threaded studs
