5
Service Procedure
Side Sensor Display Installation
Procedure-
1.
Reconnect the VORAD Harness to the Side Sensor Dis-
play.
2.
Attach the Side Sensor Display to the bracket using two
(2) #4 flat washers, two (2) #4 lock washers, and two (2)
#4-40 acorn nuts and slightly tighten.
3.
Align the Side Sensor Display with the view from the
driver’s seat.
4.
Torque the two (2) acorn nuts to 5-7 lbs. in. (.5-.8 N•m).
Final Check
Make sure the acorn nuts are properly tightened.
Make sure the VORAD Harness is connected and locked.
Side Sensor
Display
VORAD
Harness
1
Reconnect Harness to
Side Sensor Display
Side Sensor
Display
Wrench
Acorn Nut
2
Install Side Sensor Display
on Mounting Bracket
Side Sensor
Display
3
Align Side Sensor
Display
Side Sensor
Display
Wrench
4
Torque Acorn Nuts
