14
In Case of an Accident
In Case of an Accident
The Accident Recorder can store two segments of system data in the system’s
non-volatile memory. The first of the two segments may be stored by pushing
and holding the “RANGE” knob on the Driver Display for approximately five
(5) seconds. Within six (6) seconds, the green “S/C” light will blink eight
times, confirming storage of the data (see Figure 9). Subsequent pushing of
the “RANGE” knob will cause the system to respond with a “FAIL” tone indi-
cating the data storage area is full. The second segment runs continuously
recording system data until the system is powered down.
The system’s Central Processing Unit must be returned to Eaton Corporation
to download and interpret the recorded data in the non-volatile memory.
Before shipping the unit contact the Eaton VORAD Accident Reconstruction
Specialist at 269-342-3556. After confirmation, ship the Central Processor
Unit to Eaton Corporation, Attn: Accident Reconstruction Specialist, 13100 E.
Michigan Ave., Galesburg, MI 49053.
Figure 9
FAIL
ON
S/C
Warning Level
Range
Volume
S/C
Range
EATON VORAD
