8
Component Installation
Anten
na Assembly
Installation
Antenna Assembly Alignment
Note: Park the vehicle on a level surface.
Vertical Alignment
Adjust the antenna assembly to face down 0.50° from vertical.
Use a digital level held against the face of the antenna assembly.
1.
Using a 5/32" Allen wrench, slightly loosen the four screws that attach the antenna assembly to its mounting
brackets.
2.
Hold the antenna alignment tool or digital level against face of the antenna assembly.
3.
Adjust the two alignment screws on the right hand side of the antenna until the digital level indicates -0.50°
(down).
4.
Secure the antenna assembly by tightening the four locking screws with a 5/32 Allen wrench.
1 - Digital Level
2 - 4 Allen Screws (attach antenna assembly to mounting brackets)
3 - Vertical Alignment Screws (adjust antenna up and down)
1
3
2
2
Summary of Contents for VORAD AlwaysAlert
Page 29: ......
