background image

1.  Safety information 
1.1.  Signal word list 

  Any failure to observe any safety instruction in this user manual constitutes a risk to life 

and limb. 

 

 

  The annotations are marked with the following signal words

 

DANGER

 indicates a dangerous situation which, if not managed, will 

lead to death or serious injury. 

 

 

WARNING

 indicates a dangerous situation which, if not managed, may 

lead to death or serious injury. 

 

 

CAUTION

 together with the danger symbol indicates a dangerous 

situation which, if not managed, may lead to minor or moderate injuries. 

 

  Any failure to observe any safety instruction in this user manual which, though not 

resulting injury, does result in damage to the system and its functionality, is identified by 

the following signal words: 

 

NOTICE

 describes the correct usage of the device. 

 

  The above signal words can be combined with the safety warning symbols or warning 

symbols. 

 

General hazard 

 

Danger of electricity

 

 

Hazardous to the environment 

 

Risk of burns 

 

1.2.  Safety instructions 

 

 

Caution:

  

The UM units are not suitable for the treatment of water-

based liquids!

 

 

 

 In the event of leaks, collect the oil using proper methods (oil binding agents). 

 

  

The UM15 units are suitable for indoor use only and must not be installed 

outdoors! 

 

 

 

 

 

 

 

 

Summary of Contents for UM15










Reviews: