12
Tripp Lite by Eaton SmartOnline Series User Guide 614-21325—Rev 01
Figure 10. External Battery Pack Rack Installation
2
1
3
2
4
22..44..22
EExxtteennddeedd B
Baatttteerryy P
Paacckk R
Raacckkm
moouunntt C
Coonnnneeccttiioonnss
NOTE
A small amount of arcing may occur when connecting an external battery pack to the
UPS. This is normal and will not harm personnel.
To connect the external battery packs to the UPS:
1.
Insert the external battery pack cable into the UPS battery connector quickly and firmly.
2.
Plug the external battery pack power cable(s) into the external battery connector(s) and repeat until all
external battery packs are connected. Up to 4 external battery packs may be connected to the UPS. See
.
Summary of Contents for Tripp Lite SmartOnline Series
Page 12: ...6 Tripp Lite by Eaton SmartOnline Series User Guide 614 21325 Rev 01 Rear Panels...
Page 38: ...32 Tripp Lite by Eaton SmartOnline Series User Guide 614 21325 Rev 01 Retrieving the Event Log...
Page 48: ...42 Tripp Lite by Eaton SmartOnline Series User Guide 614 21325 Rev 01 Service and Support...
Page 54: ...614 2132501 614 21325 01...
