10
RS-232 Serial Control (For B119-2X2)
5. Once these settings are updated, the Terminal Emulation Software
will recognize the switch, allowing you to enter commands to control
it with. The following table lists the available commands.
Command Action
sw[x] [n]
Switches the source being displayed on the selected
output. [x] is the output (1, 2, 3, or 4) and [n] is the
desired source (A, B, C, or D). For example, a command
of sw1 B would display source B on output 1.
PWD
Turns power to the switch on/off.
STE
Displays the current output state, showing which source
is being displayed on each output.
