26
Service & Maintenance
Proper Clutch Lubrication
Service Intervals
•
Vocational - 250 hours or 1 month
Important:
It is highly important to follow proper ECA Clutch lube intervals.
Failure to do so may result in clutch failure and unnecessary repairs.
The heavy-duty ECA clutch housing has two grease fittings on the lower right
side. The upper port is marked “CS” for the upper Cross Shaft Assembly,
while the lower port is marked “RB” for the Release Bearing.
For more detailed Cross Shaft greasing information, refer to the Release Yoke
and Cross Shaft(s) Installation section in the Automated Transmission Service
Manual TRSM0930. Refer to Clutch Service Manual CLSM0200 for release
bearing greasing information.
Cross Shaft Service Interval
•
At every chassis lubrication
Proper Transmission Lubrication
Proper lubrication procedures are key to a good all-around maintenance pro-
gram. If the lubricant is not doing its job or if the lubricant level is ignored, all
the maintenance procedures in the world are not going to keep the transmis-
sion running or assure long transmission life.
Fuller
®
Transmissions are designed so the internal parts operate in an oil bath
circulated by the motion of the gears and shafts.
Thus, all parts are amply lubricated if these procedures are closely followed:
1.
Maintain lubricant level and inspect regularly.
2.
Follow maintenance interval chart.
3.
Use the correct grade and type of lubricant.
4.
Buy lubricant from an approved dealer.
!
