background image

 

24 

www.eaton.com/wireless

 

call toll free: 1-800-663-8806

 

DMAN-4077-01   R01

 

Eaton Part Number 

Description 

FMEC-3840-02 

Plastic Holster, Black 

ASSY-4041-02 Charge 

Cradle, Generic 

ASSY-4041-03 

Charge Cradle, charge only 

 

 

 

 

 

 

 

 

 

 

 

 

 

TD110 RCU

 

Size 

5.32" x 2.8" x 1.31" (135mm x 71mm x 33mm) 

Weight 

.95 lbs (434g)  

Construction 

Industrially robust, hardened plastic, chemical resistant 

Power 

Built in Rechargeable Lithium Ion  

Battery Life 

30 hours  

Operating  

Temperature Range 

 -4ºF to +131ºF  (-20ºC to +55ºC)   

Outputs 

N/A 

Antenna 

Internal 

Approvals 

USA- FCC part 15.247  Canada- IC RSS 210 Issue 6, May. 2020 

Storage temperature Range 

-4ºF to +136ºF  (-20ºC to +58ºC)   

 

Parts & Accessories

 

 

 

Specifications

 

Warranty 

 

EATON, Controls and Power Conversion Division, 

Wireless Solutions, warrants to the original pur-

chaser that the Eaton Wireless products are free 

from defects in materials and workmanship under 

normal use and service for a period of ONE YEAR, 

parts (EXCLUDING: SWITCHES, CRYSTALS, OR 

PARTS SUBJECT TO UNAUTHORIZED REPAIR 

OR MODIFICATION) and labor from the date of 

delivery as evidenced by a copy of the receipt. 

EATON entire liability and your exclusive remedy 

shall be, at EATON's option, either the (a) repair or 

(b) replacement of the EATON Wireless product 

which is returned within the warranty period to 

EATON Wireless freight collect by the EATON 

APPROVED carrier with a copy of the purchase 

receipt and with the return authorization of EATON 

Wireless. If failure has resulted from accident, 

abuse or misapplication, EATON shall have no 

responsibility to repair or replace the product under 

warranty. In no event shall EATON be responsible 

for incidental or consequential damage caused by 

defects in its products, whether such damage oc-

curs or is discovered before or after replacement or 

repair and whether or not such damage is caused 

by the negligence of EATON.

 

FCC Rules and Compliance 

 

 

This device complies with FCC Rules Part 15 operation is subject 

to the following two conditions:  

1. This device may not cause harmful interference.  

2. This device must accept any interference, including interference 

that may cause undesired operation of the device.  

Changes or modifications to this device, not expressly approved 

by Cooper Industries (Electrical) Inc. could void the user’s authori-

ty to operate the equipment  

 

Industry Canada Notifications  

This device complies with Industry Canada’s license-exempt 

RSSs. Operation is subject to the following two conditions:  

(1) This device may not cause interference; and  

(2) This device must accept any interference, including interfer-

ence that may cause undesired operation of the device. 

 

Le présent appareil est conforme aux CNR d’Industrie Canada 

applicables aux appareils radio exempts de licence. L’exploitation 

est autorisée aux deux conditions suivantes:  

(1) l’appareil ne doit pas produire de brouillage;  

(2)  l’utilisateur de l’appareil doit accepter tout brouillage ra-

dioélectrique subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement. 

 

 

EATON 

eMobility Division 

 

Mobile Wireless Control 

Solutions 

 

74-1833 Coast Meridian Road 
Port Coquitlam, BC, Canada 
V3C 6G5 

 

Tel: 604-944-9247 
Fax: 604-944-9267 

 

Toll Free: 1-800-663-8806 

 

www.eaton.com/wireless 

Summary of Contents for TD110 RCU

























Reviews: