Eaton Single EBC, Installation And Operation Manual

Page: 18 / 36

12
External Battery Cabinets
3 .3 Battery Type
3 .4 . Inspecting and Unpacking the EBC
The recommended battery types listed in Table 3-4 are supplied in the EBC. Use of mixing battery letter
designation and sizes inside Eaton cabinets will damage equipment and void the product warranty. When
replacing batteries use the same manufacturer and part number originally supplied with the unit to ensure
correct harness fit and terminal landing.Using other battery types not listed in the below table please cotact on
Eaton representive.
The cabinet is shipped bolted to a wooden pallet and covered with outer protective packaging material (see
Figure 3-5)..
Battery Model HRL 12200W
HRL 12280W
XHRL 12360W
HRL 12330W
HRL 12390W
XHRL 12410W
XHRL 12475W
HRL 12500W
XHRL 12620W
UPS12-200 MRX
UPS12-220 MRX
UPS12-280 MRX
UPS12-320 MRX UPS12-370MRX
UPS12-400 MRX
UPS12-440MRX
UPS12-475 MRX
UPS12-490MRX
UPS12-520 MRX
UPS12-550MRX
UPS12-600 MRX
UPS12-630 MRX
Battery Quantity--Eaton Single EBC 40 per string, 1 string
per cabinet
40 per string, 1 string
per cabinet
Battery Quantity--Eaton Double EBC 40 per string, two
cabinets 1 string
40 per string, two
cabinets 1 string
Battery manufacturer
CSB C&d
Table 3-4 . Battery Type
WARNING
The Accessory cabinet is heavy, if unpacking and unloading instructions are not closely followed,
the cabinet may tip and cause serious injury. If the batteries are installed into the cabinet on site, to
avoid injury the loaded battery trays should be installed into the cabinet using a forklift.
Startup and operational checks must be performed by an authorized Eaton
Customer Service Engineer, or the warranty terms specified become void. This
service is offered as part of the sales contract for the UPS. Contact an Eaton service
representative in advance (usually a two-week notice is required) to reserve a
preferred startup date.
NOTE