background image

Page 8 

 

© Eaton 2017 

The information, recommendations, descriptions and 
safety notations in this document are based on Eaton 
Corporation’s (“Eaton”) experience and judgment and may 
not cover all contingencies. If further information is 
required, an Eaton sales office should be consulted. Sale 
of the product shown in this literature is subject to the 
terms and conditions outlined in appropriate Eaton selling 
policies or other contractual agreement between Eaton 
and the purchaser. 

THERE ARE NO UNDERSTANDINGS, AGREEMENTS, 
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 
WARRANTIES OF FITNESS FOR A PARTICULAR 
PURPOSE OR MERCHANTABILITY, OTHER THAN 
THOSE SPECIFICALLY SET OUT IN ANY EXISTING 
CONTRACT BETW EEN THE PARTIES. ANY SUCH 
CONTRACT STATES THE ENTIRE OBLIGATION OF 
EATON. THE CONTENTS OF THIS DOCUMENT SHALL 
NOT BECOME PART OF OR MODIFY ANY CONTRACT 
BETW EEN THE PARTIES. 

In no event will Eaton be responsible to the purchaser or 
user in contract, in tort (including negligence), strict liability 
or other-wise for any special, indirect, incidental or 
consequential damage or loss whatsoever, including but 
not limited to damage or loss of use of equipment, plant or 
power system, cost of capital, loss of power, additional 
expenses in the use of existing power facilities, or claims 
against the purchaser or user by its customers resulting 
from the use of the information, recommendations and 
descriptions contained herein. The information contained 
in this manual is subject to change without notice. 

Eaton, Security House, Vantage Point Business Village, 
Mitcheldean, GL17 0SZ.  
www.touchpoint-online.com 
Product Support (UK) Tel: +44 (0) 1594 541978 available 
08:30 to 17:00 Monday to Friday.  
email: [email protected] 

Part number 12945917 Issue 5, 28/09/17 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SDR-REXT









Reviews: