15
(A)
Tower-mounted placement
(B)
Rack-mounted placement
NOTE
: Press and hold the ROTATE key for more than 2 seconds, Fig.A and Fig.B
will transfer to each other.
LCD display comprises numerical value section, capacity graphics
section, fan-status graphics section and charger-status graphics
section.
Numerical value section－display the corresponding numerical value
of inquiring items(output, load, temperature, input, battery), for
example, as the graphics shows above, the output voltage is 220v, the
output frequency is 50Hz.
Capacity graphics section－display the capacity of the battery and
load. Every pane represents 20％capacity. As graphics showed above,
the capacity of the battery is 80％-100％( 5 panes), the load reaches
40％-60％(3 panes). When UPS is overload, the icon will flash, when
capacity of battery is too low or disconnected, the icon will also
flash.
Fan-status graphics section－display if the fan works normally. When
the fan works normally, it will show the dynamic fan blades rotating;
when the fan works abnormally, the icon will keep on flashing and
alarm.
Charger-status graphics section
－
display the status of the charger. When charger
works normally, the corresponding icon will vary dynamically and orderly, just as
Graphics (1);
(1)
when charger works abnormally, the icon will flash in a whole, as Graphics(2):
(2)
