109
Eaton RF-System
© 2015 Eaton Electrical Group
Room Manager with Energy Function – Input with Energy measuring Sensor
Room-Manager with energy function – Input MEP
Room Manager with Energy Function – Input with Impulse Input
:
If an impulse input is assigned to the Room Manager with Energy Function, the next free energy
input will appear as an option to select. In the Settings window of the Room Manager you will now
see a new tab with the number of this energy input.
This is what the Settings window for the energy input with impulse input looks like:
General information:
Name: This is where the name of the energy input can be entered (max. 13 characters)
Connected device: This is where the assigned impulse input channel is displayed
Measuring unit: This is where the units of the variable to be measured can be entered (currently
kWh, Wh, m3, l)
Base value: Here you can enter a base value. When displaying the Alltime value, it will be added to
the counted value at the Room Manager. This will make sure that the figure displayed at the
Summary of Contents for RF System 2.42
