Eaton RF System 2.42, Manual

Page: 108 / 244

108 Eaton RF-System - Help
© 2015 Eaton Electrical Group
Also refer to chapter Room Manager with Safety Function – Overview
General Information on the Room Manager with Energy Function :
The Energy Function will enable you to record the values of your energy, water, gas etc.
consumption and to process and display them at the Room Manager. All the counters equipped
with an S0 interface can be connected to the RF system via a Eaton
impulse input and can then
be processed at the Room Manager. In addition it also possible to record the electrical energy
consumption of the consumers or consumer circuits via the
Energy measuring sensor and to send
the consumption values to the Room Manager.
Since MRF 1.60 and RM V38 it is possible to connect the xC MEP device which is connected to a
Smart Meter with the Room-Manager.
The following functions can be carried out:
-) Display of values and costs
-) Visualization of trends and forecasts
-) Alarms and starting of actions in case a predefined limit is exceeded
-) 5 Inputs for impulse counter inputs, energy measuring sensors or xC MEP devices
General information:
If a connection between the Room-Manager and a impulse counter input, a energy measuring
sensor or a xC MEP device is drawn in the MRF all free energy inputs of the Room-Manager will
be displayed (max. 5 energy inputs).
As usual, you will then be able to carry out a more detailed configuration in the Settings of the
Room Manager.
Also refer to chapter Room Manager with Energy Function – Input with Impulse Input