27
2.3.8
Switching
You can switch between two connections using the switch function.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.10 14:40 0:22
Figure 22: Switching
1.
Press the key (short) two times or the key (short) followed by the key during
a call with an active line and a line on hold. The active line is put on hold and the line
on hold is activated (see Figure 22).
2.
To terminate the active line, you must press the key . The connection to the active
conversation partner is terminated.
Please note also the tip in chapter 2.3.7 "Making second Call" beginning on page 26.
2.3.9
Transferring a Call
You are making a call and would like to transfer it to another party.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.10 14:40 0:22
Figure 23: Transferring a Call
1.
Press the key (short) during a call.
The call is put on hold. You hear a dial tone. The line on hold is displayed normally
and the active line inversely.
2.
Dial the call number of your choice.
The connection is established. If the called party answers, this can be treated like a
second call, as above.
3.
To connect the caller will be connected with the dialled number you have the
following possibilities:
a.
Put the handset back on its rest (handset mode).
b.
Press the loudspeaker key (hands free mode).
c.
Press the headset key (Key
long (longer than a second) and then the
loudspeaker key ) (headset mode).