Eaton Remote Power Panel, User Manual

Page: 56 / 64

Maintenance
42 Eaton Remote Power Panel (RPP) User’s Guide 164202125—Rev 5 www.eaton.com/powerquality
Cooper Bussmann Fuse Replacement
The disconnect fuses need to be replaced with same class and rating Cooper Bussmann fuses to maintain the
200 KAIC rating
.
Fuses are Cooper Bussmann CUBEFuse and are available in indicating (shows if the fuse is
blown) or non-indicating types. Ratings are available from 1A to 60A. See Figure 25 for the spare fuse
compartment location.
Figure 25. Cooper Bussmann Panel Spare Fuse Compartment
Storage
If you store the RPP for any period, store it with its protective packaging material in place. Protect the stored
equipment at all times from excessive moisture, dirt, corrosive conditions, and other contaminants. See
Table 20 on page 44 for environmental specifications.
Do not store the RPP outdoors or stack other equipment on top of the RPP, whether packaged or not.
Recycling the Used RPP
Contact your local recycling or hazardous waste center for information on proper disposal of the used RPP.
CAUTION
Do not discard the RPP in the trash. This product must be disposed of properly. For more information,
contact your local recycling/reuse or hazardous waste center.
CAUTION
Do not discard waste electrical or electronic equipment (WEEE) in the trash. For proper disposal, contact
your local recycling/reuse or hazardous waste center.
Spare Fuse Compartment