PXM 2000 Quick Start Guide
Configuring the Meter’s Gateway Card for Network Accessibility
6
www.eaton.com IM02601002E
Location of Gateway Card
There are four indicator LEDs on the Gateway Card labeled:
Status
,
DHCP
,
Ident
, and
Power
. When power is first applied all the lights should be off for a few seconds and
then the
Power
light will illuminate . This indicates the card has power and is running .
Configuring the Meter’s Gateway Card for Network Accessibility
Configuring a Fixed IP Address for the Gateway Card using a local PC
Your network administrator provided an IP address, a subnet mask, and a default gate-
way (which you entered in the previous section) . This information must be entered into
the Gateway Card using a local PC, such as a laptop .
This method requires a PC with the following:
• an Ethernet port
• an Ethernet cable (either straight-through or cross-over)
• A web browser such as Internet Explorer 7 or 8
• an installed version 6 or later JAVA J2SE JRE (Java Runtime Environment) . If not
already installed you may download it from
www .java .com
and install it . (If Java isn’t
installed, you’ll be prompted to install it .)
To configure the Gateway Card:
1 . On the PC, launch the
Java Control Panel
screen (available through the Windows
