background image

Contents

Description Page

Mechanical Installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
Electrical Wiring  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Network Planning    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Locating the Gateway Card   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Configuring the Meter’s Gateway Card for  

Network Accessibility   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6

Configuring a Fixed IP Address for the  

Gateway Card using a local PC    .  .  .  .  .  .  .  .  .  .  .  .  . 6
Verify the IP address   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9

Network Access    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
Restarting and Factory Defaults   .  .  .  .  .  .  .  .  .  .  .  .  .  . 9

Restart the Gateway Card   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9

Additional Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10

 Rev. 2 

 December 2011

PXM 2250
PXM 2260
PXM 2270
PXM 2280
PXM 2290

Quick Start Guide 

IM02601002E

Power Xpert Meter 2000 Series

 

Summary of Contents for PXM 2250













Reviews: